FII Machinery Manufacturing Co. LTD

RHP Rolamentos de esferas auto-alinhados

Self-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the inner ring, balls and cage to deflect to some extent around the bearings center. The axial load capacity is low since the contact angle is small. Under normal loads, the permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees).

Product Features and Benefits:

High quality steel - Ultra clean steel helps extend bearing life extended up to 80%

Pressed steel and polyamide cages available

Advanced Grease Technology - Lubricants that can extend grease life and performance

High grade balls - Smooth and quiet operation even at high speeds

Super Finished Raceways - Refined to minimize noise and improve lubricant life and distribution

Sealed versions are available

38,1 mm x 95,25 mm x 23,8125 mm RHP NMJ1.1/2 Rolamentos de esferas auto-alinhados: a : 59,5 mm; Classificação básica Da carga estática (C0) : 393 kN

69,85 mm x 158,75 mm x 34,925 mm RHP NMJ2.3/4 Rolamentos de esferas auto-alinhados: Cr : 1410000 N / Dynamic; rmin : 4 mm

31.75 mm x 79,375 mm x 22,225 mm RHP NMJ1.1/4 Rolamentos de esferas auto-alinhados: rmin : 0,8 mm; Inventário : 0.0

95,25 mm x 171,45 mm x 28,575 mm RHP NLJ3.3/4 Rolamentos de esferas auto-alinhados: Bearing number : HM215249/HM215210; d : 75,987 mm

28,575 mm x 71,4375 mm x 20,6375 mm RHP NMJ1.1/8 Rolamentos de esferas auto-alinhados: d : 200 mm; DA_ : 56

38,1 mm x 82,55 mm x 19,05 mm RHP NLJ1.1/2 Rolamentos de esferas auto-alinhados: d : 15,000 mm; Width (mm) : 16,000

152,4 mm x 266,7 mm x 39,6875 mm RHP NLJ6 Rolamentos de esferas auto-alinhados: Outer Diameter (mm) : 16; Tolerância do comprimento de rolamento(B tol.) - +0 / -0.40 : +0 / 0.40

28,575 mm x 63,5 mm x 15,875 mm RHP NLJ1.1/8 Rolamentos de esferas auto-alinhados: r1,2 - min. : 6 mm; Velocidade Limite : 800 r/min

76,2 mm x 146,05 mm x 26,9875 mm RHP NLJ3 Rolamentos de esferas auto-alinhados: D1 : 135 mm; d : 90 mm

139,7 mm x 241,3 mm x 34,925 mm RHP NLJ5.1/2 Rolamentos de esferas auto-alinhados: L : 355.6 mm; d2 : 130.175 mm

41,275 mm x 101,6 mm x 23,8125 mm RHP NMJ1.5/8 Rolamentos de esferas auto-alinhados: B : 46,038 mm; a : 12,7 mm

34,925 mm x 76,2 mm x 17,4625 mm RHP NLJ1.3/8 Rolamentos de esferas auto-alinhados: P : 1,5 mm; S : 0,7 mm