FII Machinery Manufacturing Co. LTD

RHP Rolamentos de esferas auto-alinhados

Self-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the inner ring, balls and cage to deflect to some extent around the bearings center. The axial load capacity is low since the contact angle is small. Under normal loads, the permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees).

Product Features and Benefits:

High quality steel - Ultra clean steel helps extend bearing life extended up to 80%

Pressed steel and polyamide cages available

Advanced Grease Technology - Lubricants that can extend grease life and performance

High grade balls - Smooth and quiet operation even at high speeds

Super Finished Raceways - Refined to minimize noise and improve lubricant life and distribution

Sealed versions are available

120,65 mm x 254 mm x 50,8 mm RHP NMJ4.3/4 Rolamentos de esferas auto-alinhados: Velocidade de lubrificação : 1800 r/min; Classificação básica Da carga estática (C0) : 915 kN

50,8 mm x 101,6 mm x 20,6375 mm RHP NLJ2 Rolamentos de esferas auto-alinhados: Width (mm) : 45; C : 22,5 mm

85,725 mm x 190,5 mm x 39,6875 mm RHP NMJ3.3/8 Rolamentos de esferas auto-alinhados: Outer Diameter (mm) : 90,000; Frequência característico Da gaiola, FTF : 0.42 Hz

114,3 mm x 203,2 mm x 33,3375 mm RHP NLJ4.1/2 Rolamentos de esferas auto-alinhados: Diâmetro chato (mm) : 38,000; d : 38,000 mm

69,85 mm x 133,35 mm x 23,8125 mm RHP NLJ2.3/4 Rolamentos de esferas auto-alinhados: Width (mm) : 20; Bearing number : BK6520

22,225 mm x 57,15 mm x 17,4625 mm RHP NMJ7/8 Rolamentos de esferas auto-alinhados: Bearing number : GE 30 SB; D : 55 mm

107,95 mm x 190,5 mm x 31,75 mm RHP NLJ4.1/4 Rolamentos de esferas auto-alinhados: C : 30 mm; da min. : 85 mm

63,5 mm x 127 mm x 23,8125 mm RHP NLJ2.1/2 Rolamentos de esferas auto-alinhados: Diâmetro chato (mm) : 105; D : 160 mm

50,8 mm x 114,3 mm x 26,9875 mm RHP NMJ2 Rolamentos de esferas auto-alinhados: C : 35 mm; d : 42 mm

31.75 mm x 69,85 mm x 17,4625 mm RHP NLJ1.1/4 Rolamentos de esferas auto-alinhados: Material : Wrapped bronze with; Tamanho do formato (ds) - 100 -0.120 / -0.155 : 100 0.120 / 0.155

114,3 mm x 238,125 mm x 50,8 mm RHP NMJ4.1/2 Rolamentos de esferas auto-alinhados: A1 : 3,5 mm; Bearing number : PFD 40 TF

22,225 mm x 50,8 mm x 14,2875 mm RHP NLJ7/8 Rolamentos de esferas auto-alinhados: Outer Diameter (mm) : 117,475; D : 117,475 mm