FII Machinery Manufacturing Co. LTD

NTN Rolamentos de esferas de impulso

These bearings have balls enclosed in a cage between the shaft raceway washer that corresponds to the inner ring, and the housing raceway washer that corresponds to the outer ring. They can bear only single-direction axial loads.

These are used in back-to-back duplex (DF) arrangement and can support only bi-directional axial loads. They are superior to double-direction thrust angular ball bearings in high-speed properties, with low axial rigidity.

Most rolling bearings consist of bearing rings (an inner ring and an outer ring), rolling elements and a rolling element retainer (cage). The retainer separates the rolling elements at regular intervals, holds them in place within the inner and outer raceways, and allows them to rotate freely. Rolling bearings fall into two main classifications: ball bearings and roller bearings. Balls geometrically contact the raceway surfaces of the inner and outer rings at “points,” while the contact surface of rollers is a “line” contact. Rollers come in four basic geometric styles: cylindrical, needle, tapered and spherical. Rolling bearings can further be classified according to the direction in which the load is applied: radial, thrust, or a combination of both. While the rolling elements and the bearing rings take any load applied to the bearings (at the contact point between the rolling elements and raceway surfaces), the retainer takes no direct load. It only serves to hold the rolling elements at equal distances from each other, forcing the rolling elements to enter the load zones and prevent them from falling out.

NTN 562008 Rolamentos de esferas de impulso
N/A
2,5 mm
NTN 51114 Rolamentos de esferas de impulso
INA
M6
NTN 562948 Rolamentos de esferas de impulso
NACHI
25x62x17
NTN 51406 Rolamentos de esferas de impulso
658 kN
7340 A
NTN 562932M Rolamentos de esferas de impulso
1,1 mm
34
NTN 51207 Rolamentos de esferas de impulso
10000 r/min
100
NTN 51316 Rolamentos de esferas de impulso
76,2
11,6 Kg
NTN 51408 Rolamentos de esferas de impulso
130,65 mm
90x130.65x37
◂ Página anterior Próxima página ▸
Todos os Produtos Contate agora
Catálogo produtos
Timken Rolamentos cilíndricos
Toyana Rolamentos de agulha
RHP Rolamentos de esferas auto-alinhados
FAG Rolamentos de esferas de contacto angular
NTN Rolamentos de esferas de impulso
KBC Rolamentos de esferas profundas
SKF Rolamentos de rodas
INA Rolamentos de rolos
ISO Rolamentos de rolos gravados
KOYO Rolamentos esféricos de rolamentos
AST Rolamentos lineares
ISB Rolamentos simples
NKE Unidades de rolamento
SKF Rolamentos axiais de rolos cilíndricos
Conjuntos de rolamentos integrados AP