Timken® single-row EMA series cylindrical roller bearings incorporate a unique cage design, proprietary internal geometry and special surface textures, available in a wide variety of size ranges and configurations.

Timken suggests the following storage guidelines for its finished products (bearings, components and assemblies, hereinafter referred to as “Products”): • Unless directed otherwise by Timken, Products should be kept in their original packaging until they are ready to be placed into service. • Do not remove or alter any labels or stencil markings on the packaging. • Products should be stored in such a way that the packaging is not pierced, crushed or otherwise damaged. • After a Product is removed from its packaging, it should be placed into service as soon as possible. • When removing a Product that is not individually packaged from a bulk pack container, the container should be resealed immediately after the Product is removed. • Do not use Product that has exceeded its shelf life as defined in Timken’s shelf life guidelines statement. • The storage area temperature should be maintained between 0º C (32º F) and 40º C (104º F); temperature fluctuations should be minimized. • The relative humidity should be maintained below 60 percent and the surfaces should be dry. • The storage area should be kept free from airborne contaminants such as, but not limited to, dust, dirt, harmful vapors, etc. • The storage area should be isolated from undue vibration. • Extreme conditions of any kind should be avoided.